 |
         |
|
|
Model PD695
The PD695 is a True RMS AC Volt Meter. It can handle low mV inputs such as 50 mV or high voltage inputs up to 250 VAC. The True RMS feature allows non-sinusoidal waveforms to be measured with high accuracy. The unit displays this signal in engineering units on a 4-1/2 digit display that also includes an extra zero which may be used to handle numbers up to 299,990. True RMS 0-250 VAC Meter
Features Specifications Order Info
Features
- True RMS Indication for Greater Accuracy
- 50 mV, 200 mV, 20 V, or 250 V Field Selectable Inputs
- Field Selectable Noise Filtering
- Peak Hold Feature
- Steady, Accurate Display to 299,990
- 41/2 Digit + Extra Zero Display
- NEMA 4X Front Panel
- 2 or 4 Relays + 4-20 mA Output Option
Noise Filter
The field selectable noise filter allows the meter to be programmed so that an unsteady (noisy) input can be displayed with greater stability.
Top Features Specifications Order Info
Ordering Information
Model Description 115 VAC *PD695-3-N No Options PD695-3-14 2 Relays PD695-3-15 4-20 mA Output PD695-3-16 2 Relays + 4-20 mA Output PD695-3-17 4 Relays PD695-3-18 4 Relays + 4-20 mA Output 230 VAC PD695-4-N No Options PD695-4-14 2 Relays PD695-4-15 4-20 mA Output PD695-4-16 2 Relays + 4-20 mA Output PD695-4-17 4 Relays PD695-4-18 4 Relays + 4-20 mA Output * Quick Shipment Item, shipped within 2 working days.
Most other products shipped within 1 week, call for best shipping date. Top Features Specifications Order Info
Specifications
- INPUTS: Field Selectable: 50 mV, 200 mV, 2 V, 20 V, 250 V
- INPUT FREQUENCY RESPONSE: 10 Hz to 30 KHz
- DISPLAY: Bright, large, 0.56" (14.2mm) high efficiency red LED. 4 1/2 digits + extra zero may be switched on to display 29,999(0). Leading zeros blanked.
- DISPLAY UPDATE: 2 times per second
- CREST FACTOR: up to 5:1
- ACCURACY: +/-0.1% of full scale @ 60 Hz
- RESOLUTION: 0.025% of full scale
- HOLD READING or EXTERNAL ACKNOWLEDGE: Connect ACK/HLD and COM terminals, and select jumper pins JP5 on rear.
- LOOP POWER: Isolated 24 VDC @ 20 mA regulated +/-5%. Noise less than 10 mV p-p. Max. loop resistance of 1200 ohms. Available for the 4-20 mA output option.
- NON-VOLATILE MEMORY: All programming values are stored in non-volatile memory for ten years if power is lost.
- LOCKOUT: Jumper JP6 restricts modification of calibration values.
- INPUT IMPEDANCE: Greater than 1 Mohm
- POWER: 115 VAC or 230 VAC +/-10%, 50/60 Hz, 10 VA
- ENCLOSURE: 1/8" DIN, high impact plastic, UL 94V-0
- FRONT PANEL: NEMA 4X, panel gasket provided.
- CONNECTIONS: Removable screw terminal block (provided).
 |
